signwire system
Total  listed
Channel letters system
from the power supply thru final splice –
all under one UL File Number E339010





 The Pluses of the Paige LED Blue System




Single Point for Product Purchase’s

Plus
Reduce U.L. Compliance PaperWork

Plus
All Accessory Products Under 1 UL File Listing

Plus
All Individual Products U.L. Listed

Plus
Greater Control over Manufacturing Process

Plus
Simple Product Specification For Regional/ National Project

Plus
Easier Field Inspection of Installed Product for Compliance with Specification

RIP STRIP II LOGO
988182L (500 ft. box) & 988182M (1,000 ft. spool)
 2 Conductor, 18 AWG stranded tinned copper conductor insulated with a Blue Polyvinyl Chloride jacket overall. UL Listed for sunlight resistant applications 105°C.
USE: A 2-18 AWG conductor LED WIRE for connecting low voltage DC power sources to LED modules. “Can be used indoors or outdoors”
 UL LOGO    RoHs Logo  UL E359998   RoHs Logo


9841814L(500 ft. box) & 9841814M(1,000 ft. spool)
2 Conductor, 18 AWG stranded tinned copper conductor insulated with Polyvinyl Chloride and a 14 AWG stranded bare copper conductor in a zip style Blue Polyvinyl Chloride jacket overall. UL Listed for sunlight resistant applications 105°C.
USE: A 2-18 AWG conductor LED WIRE for connecting low voltage
DC power sources to LED modules with a 14 AWG safety ground wire when grounding is required. “Can be used indoors or outdoors”
 UL LOGO    RoHs Logo  UL E359998   RoHs Logo


LED WIRE - 2 Conductor, 18 AWG stranded tinned copper conductor insulated with Polyvinyl Chloride and a Polyvinyl Chloride jacket overall UL Listed sunlight resistant PLTC
105°C CMG FT-4 (250 ft. box & 1000 ft. spool)
USE: A 2-18 AWG conductor PLTC Cable for connecting low voltage DC power sources to LED modules. “Can be used indoors or outdoors”UL LOGO    RoHs Logo  UL E191597   RoHs Logo



LED WIRE - 2 Conductor, 18 AWG stranded tinned copper conductor insulated with Polyvinyl Chloride and a Polyvinyl Chloride jacket overall UL Listed sunlight resistant PLTC
105°C CMG FT-4 (250 ft. box & 1000 ft. spool)
USE: A 2-18 AWG conductor PLTC Cable for connecting low voltage DC power sources to LED modules. “Can be used indoors or outdoors”
UL LOGO    RoHs Logo  UL E191596   RoHs Logo


LED WIRE - 2 Conductor, 18 AWG stranded tinned copper conductor PLENUM insulated with a Blue jacket
UL Listed sunlight resistant 150°C FT-6 (100 ft. bagged)
USE: A 2-18 AWG conductor PLENUM insulated LED cable for connecting low voltage DC power sources to LED modules in PLENUM (air handling) applications. “Can be used indoors or outdoors”
This breakthrough in technology features a high temperature plenum cable recommended for use outdoors on channel letters that are on the outside of a building as well as on the inside of a building in plenum spaces without conduit.
Specifically engineered for use where exposed to UV (sunlight) or moisture. Huge savings in both installation and labor costs are realized compared to using Class 2 or Class 3 wires that must be installed in conduit.
UL LOGO    RoHs Logo  UL E191596   RoHs Logo


RIP STRIP II LOGO

980014 (14") & 980030 (30")
Reduces material and Labor costs.
9/16 inch holes are all that is required.
No sharp metal edges in contact with insulated conductors.
UL Listed and designed specifically for LED channel Letters.
 UL LOGO    patent pending 


                
Specifically designed for LED transformer applications.
Small enough to manage in tight spaces. Front loading allows vertical placement and transformers to be installed later. Side mounted spring power source holding clips allow installation of powers sources without the use of screws. Holes in the bottom allow natural ventilation to rise to the top and condensation to escape from the bottom. Allows one or two transformers to be installed in the box. Wet listed by UL. Can be used for electronic neon transformers. Secondary connections remain free from all moisture and corrosion when used with the Paige Anti-Corrosion Splice Kit.

 UL LOGO    UL E339010    patent pending

                
Designed specifically for low voltage splice applications. No stripping of wires. Allows for one power input and 2 output wires. Accommodates wires from 16 AWG to 22 AWG. Eliminates exposed copper exposure to oxygen and moisture. Anti-corrosion jell operates from -40°C to 105°C. Only pliers are needed for installation. UL & c(UL) listed UL LOGO    RoHs Logo  

                

Accommodate SIX 18 AWG stranded wires (power source +5). Eliminates exposed copper exposure to oxygen and moisture. Locking lid provides strain relief for wires. Anti-corrosion jell operates from -40°C to 105°C. Anti-corrosion jell is water resistant and rain tight. Sunlight resistant. Rated at 600 Volts. No special tools other than wire stripper needed for installation. UL & c(UL) listed
UL LOGO    RoHs Logo  UL LOGO   UL 314R